Liquid Detected in Lightning Connector on iPhone: Fix it Now!

Noticing Error On Connecting your iPhone for Charging. Here is the Simple Guide to Fix Liquid Detected in Lightning Connector Error on iOS Device.

Are you seeing the error message “Liquid Detected in Lightning Connector” on your iPhone? This means somehow, water has seeped into the lightning port. To avoid any mishap during charging with you or your iPhone, you are seeing the warning, which is a safety mechanism introduced by Apple. The cautionary pop-up ensures that you do not mindlessly set the iPhone on charge only to short-circuit the iPhone electronics board.

Once you see the Liquid Detected in Lightning Connector error on your iPhone, you need to follow the troubleshooting tips I have shared in this guide. In rare instances, it was also seen that while using non-certified charging accessories with your Apple iPhone, users come across the error message. Some users have also cited seeing this Liquid Detected in Lightning Connector warning even though their iPhone was never exposed to water.

Tips to Fix Liquid Detected in Lightning Connector Error on iPhone

Check these troubleshooting tips to overcome the Liquid Detected in Lightning Connector warning and resume charging your iPhone.

Restart the iPhone

Restarting the iPhone did the trick for some users when the Liquid Detected in the Lightning Connector error showed up randomly, even when the device has never been exposed to the water surface. You can try it as well.

  1. Long press the power button on the side of the iPhone.
  2. The Slide to Power Off option will show up. Follow the instructions.
    switch off iPhone
  3. Once the iPhone is turned off, wait for a few seconds before pressing the side button to turn the iPhone on again.

After restarting the iPhone, try to force restart the iPhone if you encounter the warning message. Here are the steps for that.

  1. Press and release the Volume Up button, followed by the Volume Down button.
  2. Now long, press the power button until you see the Apple logo on the screen.

Ensure to Use Apple Certified Charging Accessories

As an additional tip, I will suggest using charging accessories certified by Apple and compatible with your iPhone model. If the iPhone’s original charger is damaged, replace it with an authenticated one from Apple’s website. It’s expensive but safe by all means compared to those cheap replicas that rarely come with any certification or warranty.

Dry the iPhone Ports

Take a clean, dry cloth and carefully wipe near the ports to remove any moisture or water residue. Apart from that, you can use a blower to blow warm air gently near the port of the iPhone. This may not be the best method out there, but it can dry the liquid residue present there.

Additionally, check that the iPhone charging bricks are dry and the charging pins do not have water or moisture on them. That may also cause you to see the warning message regarding the presence of liquid in the charging port.

Use Wireless Charger to Recharge the iPhone

As they say, modern problems require modern solutions; here is a smart tip for you. If you are not able to set the iPhone to charge due to the Liquid Detected in the Lightning Connector warning, use a Wireless charger. Go for the Qi-certified chargers from Apple.

Otherwise, on the e-commerce platforms, you can check out various brands that sell Wireless chargers for Apple iPhones. Make sure to read the reviews and check the compatibility of the Wireless charger before buying it for your iPhone.

Opt for the Emergency Override Option

When you see the Liquid Detected in the Lightning Connector error, it should also show another option. It is the Emergency Override feature. You can select this option to bypass the warning and set your iPhone to charge. However, only go for this if you are sure your iPhone was not exposed to water and it is completely dry.

emergency override in iPhone

Otherwise, your iPhone may get short-circuited, or you may experience other dangerous impacts, such as electrical shock. When you are in an emergency, and you need to charge the iPhone so that the battery doesn’t die out entirely, go for this alternative.

Conclusion

This wraps up the troubleshooting guide on how to fix the Liquid Detected in Lightning Connector error message on the iPhone. If you see this error, make efforts to dry the lightning ports instead of being casual about it. Do not charge the iPhone or override the error message unless it is a crisis and you must charge the device.

If you have any thoughts on How to Fix Liquid Detected in Lightning Connector Error on iPhone?, then feel free to drop in the comment box below. Also, please subscribe to our DigitBin YouTube channel for video tutorials. Cheers!

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button