The Oppo Find X6 Pro comes with a 1-inch sensor

The next Oppo flagship will be the Find X6, which, if everything is true, will come in three editions. In addition to the basic model, there will also be a Pro variant, which, among other things, will be interesting because of the huge, 1-inch image recording unit adorning the back.
The Oppo Find X6 series will come with a base model and two Pro editions, one of which will be powered by a Snapdragon 8 Gen 2 chipset, and the other will be equipped with a MediaTek Dimensity 9200 processor. Under the hood of the basic model is Qualcomm Snapdragon 8+ Gen 1, which is an earlier but still powerful flagship chip.
The Find X6 Pro version equipped with Qualcomm Snapdragon 8 Gen 2 will be equipped with LPDDR5X RAM modules and UFS 4.0 storage, the other two models are expected to receive older standard operating memory and backup storage. All three smartphones will have three 50-megapixel cameras on the back, although they will differ in terms of the sensors they contain.
On the back of the Snapdragon 8 Gen 2 Pro, a primary module equipped with a 1-inch Sony IMX989 sensor will be placed, which will be complemented by two 1/1.56-inch Sony IMX890 units. Equipped with the MediaTek Dimensity 9200 chip, the Oppo Find X6 Pro will be equipped with a Sony IMX890 sensor for all its rear cameras. As for the basic model, its primary camera will also be based on a Sony IMX890 sensor, the ultra-wide-angle unit will have an ISOCELL JN1 sensor, and the telephoto module will have a Sony IMX763 sensor.
All three car flagships will also be equipped with a 3D ToF sensor, and they will receive a 13-channel color image sensor, which is intended to help Hasselblad’s functions. The front camera on each device will be an RGBW IMX709 module with a resolution of 32 megapixels. In terms of image processing chip, the Pro models will be equipped with MariSilicon X2 ISP, while the base model will get the original MariSilicon.
The Oppo Find X6 Pro models debut with a 6.82-inch AMOLED display with a 120 Hz refresh rate, behind the Samsung E6 panel, in addition to the already mentioned chipset, there is a 5000 mAh battery that will support the 100 watt wired and 50 watt wireless fast charging. The Pro variants will come with an IP68 rated waterproof design.
The base model will have a slightly smaller screen, which will mean a 6.74, also 120 Hz, but this time a panel manufactured by Tianma. The hardware components of the Oppo Find X6 are powered by a battery with a capacity of 4800 mAh, the battery can be powered by 80-watt cable and 30-watt induction charging. The device will be water resistant in some way, but it may not receive an official IP rating. The debut of the Oppo Find X6 series can be expected in February.
Source: GSMArena